RK1-1 ST2 (knots, bends, hitches) Crossword
|
Down:
1) used to secure a rope to a plank, timber, post, tube, or pipe when you want to lift that object in the vertical position3) useful knot for tying down a load. forms a slip-resistant loop that acts like a pulley in a block and tackle system5) the portion of the rope that forms the loop is called the7) used to fasten together two ropes of Equal diameter9) which knot forms a non-slip loop10) to join a large-diameter rope to a small diameter rope you would use a |
Across:
2) used to secure a rope to a fixed object, such as a post4) form a small loop by passing the end of rope over the standing part. pass the end under the bight and pull it up through the loop. pass the end behind the standing part, then back down through the loop. tighten the knot by holds both the end of the rope and the loop in one hand and the standing part in the other. pull until knot is tight.6) used together with the round turn and two half hitches, the clove hitch, and the timber hitch. gives knot a much better grip on an object being lifted in a vertical position.8) to join a large-diameter rope to a small diameter rope you would use a10) the knot that multiplies the tension you apply to a rope is the11) for over head lifting, use a12) used to secure a rope to a plank, timber, post, tube, or pipe when you want to lift that object in the vertical position |
 |
|
|